Tag Archives: sc connector

UniCam High-Performance SC Connector, Multimode 50/125 10 Gig, Ceramic Ferrule, Single Pack

UniCam High-Performance SC Connector, Multimode 50/125 10 Gig, Ceramic Ferrule, Single Pack

UniCam Pretium SC Connector, MM 50/125 10 GB, Ceramic, Single Pack

Corning Cable Systems UniCam® High-Performance Connectors offer best-in-class optical performance in a fast, easy field-termination solution. These high-precision ceramic ferrule multi-mode connectors guarantee a 0.1 dB typical/0.5 dB maximum insertion loss per connector pair for exceptional network performance. Installation of an LC, SC, or ST® Compatible Connector can be accomplished in about 45 seconds with the UniCam High-Performance Tool Kit. The lightweight, hand-held installation tool and the high-performance cleaver virtually eliminate human variability from installation, ensuring terminations are right, the first time, every time. This kit was designed with consideration for the network installers, from the cleaver, with its integrated fiber scrap bin and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance guaranteed.

Every UniCam Connector is guaranteed to meet the published specification at the time of installation, or Corning Cable Systems will replace it.

Features

  • Broad operating temperature (-40°C to +75°C)
  • Factory-polished end face
  • Fast termination (around 45 seconds) and no consumables
  • Guaranteed 0.1 dB typical/0.5 dB maximum insertion loss per connector pair

Specifications

Intermateability FOCIS compliant with TIA/EIA 604-3
Qualification Passed EIA/TIA 568-B.3
Durability 0.2 dB change, 500 rematings, FOTP-21
Tensile Strength 10lb ≤ 0.2 dB change on jacketed cable exceeds;
0.5lb ≤ 0.2 dB change on 900µm cable; FOTP-6
Operating Temperature -40°C to +75°C, exceeding EIA/TIA 568-B.3
Connector Type SC
Fiber 50 µm LOMMF§
Insertion Loss (dB)* 0.1 typical/0.5 maximum
Reflectance (dB)** ≤-26
Housing Color Code Black
Boot Color*** Aqua

* Insertion loss values given for installation using a UniCam High-Performance Tool Kit. When installed using a UniCam Standard Tool Kit,the insertion loss values are 0.3 dB typical and 0.75 dB maximum.
** Reflectance values for single-mode are for 18°C to 26°C.
*** SC and ST Compatible Connectors are sold with one 900µm boot and one 2.9mm boot.
§ LOMMF = Laser-optimized multimode fiber.

To purchase this UniCam Pretium SC Connector, MM 50/125 10 GB, Ceramic, Single Pack please visit Fiber Savvy’s website.

UniCam High-Performance SC Connector, Multimode 62.5/125, Ceramic Ferrule, Single Pack

UniCam High-Performance SC Connector, Multimode 62.5/125, Ceramic Ferrule, Single Pack

UniCam Pretium SC Connector, MM 62.5/125, Ceramic, Single Pack

Corning Cable Systems UniCam® High-Performance Connectors offer best-in-class optical performance in a fast, easy field-termination solution. These high-precision ceramic ferrule multi-mode connectors guarantee a 0.1 dB typical/0.5 dB maximum insertion loss per connector pair for exceptional network performance. Installation of an LC, SC, or ST® Compatible Connector can be accomplished in about 45 seconds with the UniCam High-Performance Tool Kit. The lightweight, hand-held installation tool and the high-performance cleaver virtually eliminate human variability from installation, ensuring terminations are right, the first time, every time. This kit was designed with consideration for the network installers, from the cleaver, with its integrated fiber scrap bin and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance guaranteed.

Every UniCam Connector is guaranteed to meet the published specification at the time of installation, or Corning Cable Systems will replace it.

Features

  • Broad operating temperature (-40°C to +75°C)
  • Factory-polished end face
  • Fast termination (around 45 seconds) and no consumables
  • Guaranteed 0.1 dB typical/0.5 dB maximum insertion loss per connector pair

Specifications

Intermateability FOCIS compliant with TIA/EIA 604-3
Qualification Passed EIA/TIA 568-B.3
Durability 0.2 dB change, 500 rematings, FOTP-21
Tensile Strength 10lb ≤ 0.2 dB change on jacketed cable exceeds;
0.5lb ≤ 0.2 dB change on 900µm cable; FOTP-6
Operating Temperature -40°C to +75°C, exceeding EIA/TIA 568-B.3
Connector Type SC
Fiber 62.5 µm Multimode
Insertion Loss (dB)* 0.1 typical/0.5 maximum
Reflectance (dB)** ≤-20
Housing Color Code Beige
Boot Color*** Beige

* Insertion loss values given for installation using a UniCam High-Performance Tool Kit. When installed using a UniCam Standard Tool Kit,the insertion loss values are 0.3 dB typical and 0.75 dB maximum.
** Reflectance values for single-mode are for 18°C to 26°C.
*** SC and ST Compatible Connectors are sold with one 900µm boot and one 2.9mm boot.

To purchase this UniCam Pretium SC Connector, MM 62.5/125, Ceramic, Single Pack please visit Fiber Savvy’s website.

UniCam High-Performance SC Connector, UPC Polish, Single Mode 9/125, Ceramic Ferrule, Single Pack

UniCam High-Performance SC Connector, UPC Polish, Single Mode 9/125, Ceramic Ferrule, Single Pack

UniCam Pretium SC Connector, SM 9/125, UPC Polish, Ceramic, Single Pack

Corning Cable Systems UniCam® High-Performance Connectors offer best-in-class optical performance in a fast, easy field-termination solution. These high-precision ceramic ferrule single-mode connectors guarantee a 0.2 dB typical/0.5 dB maximum insertion loss per connector pair for exceptional network performance. Installation of an LC, SC, or ST® Compatible Connector can be accomplished in about 45 seconds with the UniCam High-Performance Tool Kit. The lightweight, hand-held installation tool and the high-performance cleaver virtually eliminate human variability from installation, ensuring terminations are right, the first time, every time. This kit was designed with consideration for the network installers, from the cleaver, with its integrated fiber scrap bin and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance guaranteed.

Every UniCam Connector is guaranteed to meet the published specification at the time of installation, or Corning Cable Systems will replace it.

Features

  • Broad operating temperature (-40°C to +75°C)
  • Factory-polished end face
  • Fast termination (around 45 seconds) and no consumables
  • Guaranteed 0.2 dB typical/0.5 dB maximum insertion loss per connector pair

Specifications

Intermateability FOCIS compliant with TIA/EIA 604-3
Qualification Passed EIA/TIA 568-B.3
Durability 0.2 dB change, 500 rematings, FOTP-21
Tensile Strength 10lb ≤ 0.2 dB change on jacketed cable exceeds;
0.5lb ≤0.2 dB change on 900µm cable; FOTP-6
Operating Temperature -40°C to +75°C, exceeding EIA/TIA 568-B.3
Connector Type SC
Polish UPC
Insertion Loss (dB)* 0.2 typical/0.5 maximum
Reflectance (dB)** -55
Housing Color Code Blue
Boot Color*** Blue

* Insertion loss values given for installation using a UniCam High-Performance Tool Kit. When installed using a UniCam Standard Tool Kit,the insertion loss values are 0.3 dB typical and 0.75 dB maximum.
** Reflectance values for single-mode are for 18°C to 26°C.
*** SC and ST Compatible Connectors are sold with one 900µm boot and one 2.9mm boot.

To purchase this UniCam Pretium SC Connector, SM 9/125, UPC Polish, Ceramic, Single Pack please visit Fiber Savvy’s website.

High Density Fiber Modular Keystone Insert, SC Simplex Multimode, White

High Density Fiber Modular Keystone Insert, SC Simplex Multimode, White

HD Fiber Modular Keystone Insert, SC Simplex MM, White

Our optical fiber keystone modules are designed to snap into a wall plate/face plate, surface-mount boxes, or blank patch panels.

Features

  • Multi-purpose keystone design.
  • Snaps easily into FiberSavvy.com wall plates, blank high density patch panels or mounting box.
  • Interchangeable and replaceable.

Specifications

Insert ABS UL 94V-0, White Color
Clip Stainless
Adaptor Type SC Type, PBT, Multimode, Ivory Color.
Sleeve: Phosphor Bronze
Dust Cover PP

To purchase this HD Fiber Modular Keystone Insert, SC Simplex MM, White please visit Fiber Savvy’s website.

Fiber Patch Panel, 24 Port Loaded SC Simplex, Rack Mount, Black

Fiber Patch Panel, 24 Port Loaded SC Simplex, Rack Mount, Black

Fiber Patch Panel Preloaded with 24 Multimode SC Connectors

This FiberSavvy.com FB11-2845-24C/RL Rack Mount Fiber Patch Panel is designed to fit on a standard 19″ rack and provide optimal protection for your fiber optic applications. There are two cable entry points on the back of the panel fitted with rubber grommets to protect the fiber optic cable from damage. Each patch panel includes two 12 fiber splice trays. Also included are zip ties, cable routing clamps, mounting screws, fiber splice sleeves and installation instructions. Attractive black textured finish.

To purchase this Fiber Patch Panel, 24 Port Loaded SC Simplex, Rack Mount, Black please visit Fiber Savvy’s website.

Fiber Patch Panel, 12 Port Loaded SC Simplex, Rack Mount, Black

Fiber Patch Panel, 12 Port Loaded SC Simplex, Rack Mount, Black

Fiber Patch Panel Preloaded with 12 Multimode SC Connectors

This FiberSavvy.com FB11-2841-12C/RL Rack Mount Fiber Patch Panel is designed to fit on a standard 19″ rack and provide optimal protection for your fiber optic applications. There are two cable entry points on the back of the panel fitted with rubber grommets to protect the fiber optic cable from damage. Each patch panel includes one cable routing spool and one splice tray. Also included are zip ties, cable routing clamps, mounting screws, fiber splice sleeves and installation instructions. Attractive black textured finish.

To purchase this Fiber Patch Panel, 12 Port Loaded SC Simplex, Rack Mount, Black please visit Fiber Savvy’s website.

60KM 10/100Base-TX/FX Bridge Single-Mode Media Converter-SC Connector

60KM 10/100Base-TX/FX Bridge Single-Mode Media Converter-SC Connector

Features

  • Compliant with IEEE802.3 10Base-T, and IEEE802.3u 100Base-TX/FX standards
  • Support auto-negotiation function in TP port to detect speed (10/100M) and Duplex Mode (full/half) automatically
  • MDI/MDI-X Auto Negotiation
  • WDM Technology Combines Dual Fiber Cables into Single Fiber Greatly save the Installation cost of Expensive Fiber Cable
  • Auto Uplink: User can connect to PC or switch/hub by using either straight-through or cross-over cable. It will automatically detect the type of cable and link the connection
  • Link Fault Pass-Through: When the cable in one end is out (disconnected/damaged/at fault) it will inform the other end by turning OFF the remote end’s link LED’s
  • Extend fiber-optic distance up to 100km with single-mode fiber
  • LED Indicator: FX-100, FX-Link/Act, TX-100, TX-Link/Act, FDX, PWR
  • Mountable in the converter chassis

To purchase this 60KM 10/100Base-TX/FX Bridge Single-Mode Media Converter-SC Connector please visit Fiber Savvy‘s website.

10KM Gigabit Ethernet 1000Mbps Singlemode Media Converter-SC Connector

10KM Gigabit Ethernet 1000Mbps Singlemode Media Converter-SC Connector

Compliant with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and IEEE802.3ab 1000Base-TX/FX standards. Support auto-negotiation function in TP port to detect speed (10/100/1000M) and Duplex Mode (full/half) automatically.

Features

  • Compliant with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and IEEE802.3ab 1000Base-TX/FX standards
  • Support auto-negotiation function in TP port to detect speed (10/100/1000M) and Duplex Mode (full/half) automatically
  • MDI/MDI-X Auto Negotiation
  • Support Link Alarm
  • Support Jumbo Frame (64-9216 Byte)
  • LED Indicator: SPD, FRX, FDX, TRX, POW

Included with the media converter

  • 1 Power Cord
  • 1 User’s Manual

To purchase this 10KM Gigabit Ethernet 1000Mbps Singlemode Media Converter-SC Connector please visit Fiber Savvy‘s website.

500M 1000 Base-TX/FX Bridge Multimode Media Converter – SC Connector

500M 1000 Base-TX/FX Bridge Multimode Media Converter - SC Connector

What This Product Does

The MC-2035/500M/SC/MM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC-2035/500M/SC/MM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC-2035/500M/SC/MM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with FiberSavvy.com’s 19″ system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC-2035/500M/SC/MM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers.

Applications

  • Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
  • Supports auto MID/MID-X for TX port
  • Provides switch configuration of Force /Auto transfer mode for FX port
  • Extends fiber distance up to 0.5km
  • Easy-to-view LED indicators provide status to monitor network activity easily
  • External power supply

Hardware Features

Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Basic Function Full Duplex Flow Control (IEEE 802.3x)
Extends fiber distance up to 0.5km using 50/125um fiberExtends fiber distance up to 0.22km using 62.5/125um fiber
Ports 1 1000M SC port
1 1000M RJ45 port (Auto MDI/MDIX)
Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Network Media 1000BASE-FX Multi-mode Fiber
LED Indicators PWR, LINK, RX
Dimensions( W x D x H ) 3.7″ x 2.9″ x 1.1″ (94.5mm x 73.0mm x 27.0mm)
Power Supply External Power Adapter
Safety & Emission FCC, CE
Environment Operating Temperature: 0°C~40°C (32°F~104°F)

Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

To purchase this 500M 1000 Base-TX/FX Bridge Multimode Media Converter – SC Connector please visit Fiber Savvy’s website.

20KM 10/100Base-TX/FX Bridge Singlemode Media Converter-SC Connector

20KM 10/100Base-TX/FX Bridge Singlemode Media Converter-SC Connector

The MC-2032/20K/SC/SM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC-2032/20K/SC/SM is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC-2032/20K/SC/SM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a standalone device (no chassis required) or with FiberSavvy.com’s 19″ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC-2032/20K/SC/SM will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

Features

  • Compliant with IEEE802.3 10Base-T, and IEEE802.3u 100Base-TX/FX standards
  • Support auto-negotiation function in TP port to detect speed (10/100M) and Duplex Mode (full/half) automatically
  • MDI/MDI-X Auto Negotiation
  • WDM Technology Combines Dual Fiber Cables into Single Fiber Greatly save the Installation cost of Expensive Fiber Cable
  • Auto Uplink: User can connect to PC or switch/hub by using either straight-through or cross-over cable. It will automatically detect the type of cable and link the connection
  • Link Fault Pass-Through: When the cable in one end is out (disconnected/damaged/at fault) it will inform the other end by turning OFF the remote end’s link LED’s
  • Extend fiber-optic distance up to 100km with single-mode fiber
  • LED Indicator: FX-100, FX-Link/Act, TX-100, TX-Link/Act, FDX, PWR
  • Mountable in the converter chassis

Hardware Features

Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Basic Function Half/Full-Duplex transfer mode for FX port

Full Duplex Flow Control (IEEE 802.3x)
Half Duplex Flow Control (Backpressure)
Extends fiber distance up to 20km
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely

Ports 1 100M SC port

1 100M RJ45 port (Auto MDI/MDIX)

Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)

Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)

Network Media 1000BASE-FX Single-mode Fiber
LED Indicators PWR, FDX/Col, Link/Act, SPD
Dimensions( W x D x H ) 3.7″ x 2.9″ x 1.1″ (94.5mm x 73.0mm x 27.0mm)
Power Supply External Power Adapter
Safety & Emission FCC, CE
Environment Operating Temperature: 0°C~40°C (32°F~104°F)

Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

To purchase this 20KM 10/100Base-TX/FX Bridge Singlemode Media Converter-SC Connector please visit Fiber Savvy’s website.

Page 1 of 212
%d bloggers like this: