ST-ST Fiber Patch Cable Cord Duplex MM 62.5/125 01M Orange

ST-ST Multimode

ST-ST, PC, Fiber Patch Cable, Duplex, Multi Mode. 62.5/125 Micron Fiber OM1, 3.0mm, PVC (OFNR Rated), Orange Jacket, 01 Meter, Specifically Designed for High Speed Gigabit Ethernet Applications.

Our extensive range of fiber patch cables are terminated with state-of-the-art connectors such as ST, SC, MTRJ, and LC types to meet your standard or custom configurations. FiberSavvy.com fiber jumpers are available with PC, UPC, or APC polishing types. Our fiber optic assemblies have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.

To purchase this ST-ST Fiber Patch Cable Cord Duplex MM 62.5/125 01M Orange please visit Fiber Savvy’s website.

LC-ST Fiber Patch Cable Cord Duplex MM 62.5/125 01M Orange

LC-ST Multimode

LC-ST, PC, Fiber Patch Cable, Duplex, Multi Mode. 62.5/125 Micron Fiber OM1, 1.8mm, PVC (OFNR Rated), Orange Jacket, 01 Meter, Specifically Designed for High Speed Gigabit Ethernet Applications.

Our extensive range of fiber patch cables are terminated with state-of-the-art connectors such as ST, SC, MTRJ, and LC types to meet your standard or custom configurations. FiberSavvy.com fiber jumpers are available with PC, UPC, or APC polishing types. Our fiber optic assemblies have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.

To purchase this LC-ST Fiber Patch Cable Cord Duplex MM 62.5/125 01M Orange please visit Fiber Savvy’s website.

LC-SC Fiber Patch Cable Cord Duplex 10GB MM 50/125 03M Aqua

LC-SC 10GB Multimode

LC-SC, PC, Fiber Patch Cable, Duplex, Multi Mode. 50/125 Micron 10GIG Fiber OM3, 1.8mm, PVC (OFNR Rated), Aqua Jacket, 03 Meter, Specifically Designed for High Speed 10 Gigabit Ethernet Applications.

Our extensive range of fiber patch cables are terminated with state-of-the-art connectors such as ST, SC, MTRJ, and LC types to meet your standard or custom configurations. FiberSavvy.com fiber jumpers are available with PC, UPC, or APC polishing types. Our fiber optic assemblies have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.

To purchase this LC-SC Fiber Patch Cable Cord Duplex 10GB MM 50/125 03M Aqua please visit Fiber Savvy’s website.

LC-LC Fiber Patch Cable Cord Duplex 10GB MM 50/125 05M Aqua

LC-LC 10GB Multimode

LC-LC, PC, Fiber Patch Cable, Duplex, Multi Mode. 50/125 Micron 10GIG Fiber OM3, 1.8mm, PVC (OFNR Rated), Aqua Jacket, 05 Meter, Specifically Designed for High Speed 10 Gigabit Ethernet Applications.

Our extensive range of fiber patch cables are terminated with state-of-the-art connectors such as ST, SC, MTRJ, and LC types to meet your standard or custom configurations. FiberSavvy.com fiber jumpers are available with PC, UPC, or APC polishing types. Our fiber optic assemblies have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.

To purchase this LC-LC Fiber Patch Cable Cord Duplex 10GB MM 50/125 05M Aqua please visit Fiber Savvy’s website.

LC-SC Fiber Patch Cable Cord Duplex MM 50/125 01M Orange

LC-SC Multimode

LC-SC, PC, Fiber Patch Cable, Duplex, Multi Mode. 50/125 Micron Fiber OM2, 1.8mm, PVC (OFNR Rated), Orange Jacket, 01 Meter, Specifically Designed for High Speed Gigabit Ethernet Applications.

Our extensive range of fiber patch cables are terminated with state-of-the-art connectors such as ST, SC, MTRJ, and LC types to meet your standard or custom configurations. FiberSavvy.com fiber jumpers are available with PC, UPC, or APC polishing types. Our fiber optic assemblies have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.

To purchase this LC-SC Fiber Patch Cable Cord Duplex MM 50/125 01M Orange please visit Fiber Savvy’s website.

LC-LC Fiber Patch Cable Cord Duplex 10GB MM 50/125 10M Aqua

LC-LC 10GB Multimode

LC-LC, PC, Fiber Patch Cable, Duplex, Multi Mode. 50/125 Micron 10GIG Fiber OM3, 1.8mm, PVC (OFNR Rated), Aqua Jacket, 10 Meter, Specifically Designed for High Speed 10 Gigabit Ethernet Applications.

Our extensive range of fiber patch cables are terminated with state-of-the-art connectors such as ST, SC, MTRJ, and LC types to meet your standard or custom configurations. FiberSavvy.com fiber jumpers are available with PC, UPC, or APC polishing types. Our fiber optic assemblies have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.

To purchase this LC-LC Fiber Patch Cable Cord Duplex 10GB MM 50/125 10M Aqua please visit Fiber Savvy’s website.

06 Fiber Distribution Cable MM 50/125 Indoor/Outdoor Riser

6 Fiber Distribution Cable Indoor/Outdoor

This FiberSavvy.com Distribution Riser Rated Fiber Optic Cable is ideal for Indoor/outdoor tight-bound tight-buffered design allows cables to be installed in intra-building backbone and inter-building campus locations without costly transitions between cable types. This is ideal configuration for a single termination point requiring multiple fibers.

FiberSavvy.com Distribution Riser Rated Fiber Optic Cable are high performance components and construction and It’s UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts or from floor to floor.

Features:

  • Applications:

    • Indoor/outdoor tight-bound tight-buffered design allows cables to be installed in intra-building backbone and inter-building campus locations without costly transitions between cable types
    • Ideal configuration for a single termination point requiring multiple fibers
  • Cost Savings:

    • 900 micron buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber
    • No need to splice outdoor cable to indoor cable at building entrance
    • High crush resistance may eliminate the need for innerduct
  • Features:

    • High performance components and construction
    • Cable materials are indoor/outdoor – UL-listed OFNR and UV, water and fungus resistant
    • UL Listed in accordance with NEC section 770.179(b) for use in vertical runs in building riser shafts or from floor to floor
    • Wide operating temperature range of -40°C to +85°C
    • Helically stranded core for greater flexibility and mechanical protection of the optical fibers
    • High strength-to-weight ratio
    • 2-144 fiber configuration is smaller and lighter than comparable sub-grouped cables made by others: ideal for installation in areas with limited space or tight bends
    • Can be armored for additional protection in direct burial and aerial installations
    • Interlocking armor can be applied to cables as an alternative to conduit installation

General Characteristics

Operating Temperature -40°C to +85°C
Storage Temperature -55°C to +85°C
Installation Temperature (cable temp.) -10°C to +60°C
Flame Retardancy UL Listed Type OFNR (UL 1666) and FT4 (CSA C22.2 No. 232)
Crush Resistance 2,200 N/cm
Impact Resistance 1,500 impacts
Flex Resistance 2,000 cycles

These specifications are subject to change without prior notification.

To purchase this 6 Fiber Distribution Cable MM 50/125 Indoor/Outdoor Riser please visit Fiber Savvy’s website.

60KM 10/100Base-TX/FX Bridge Single-Mode Media Converter-SC Connector

60KM 10/100Base-TX/FX Bridge Single-Mode Media Converter-SC Connector

Features

  • Compliant with IEEE802.3 10Base-T, and IEEE802.3u 100Base-TX/FX standards
  • Support auto-negotiation function in TP port to detect speed (10/100M) and Duplex Mode (full/half) automatically
  • MDI/MDI-X Auto Negotiation
  • WDM Technology Combines Dual Fiber Cables into Single Fiber Greatly save the Installation cost of Expensive Fiber Cable
  • Auto Uplink: User can connect to PC or switch/hub by using either straight-through or cross-over cable. It will automatically detect the type of cable and link the connection
  • Link Fault Pass-Through: When the cable in one end is out (disconnected/damaged/at fault) it will inform the other end by turning OFF the remote end’s link LED’s
  • Extend fiber-optic distance up to 100km with single-mode fiber
  • LED Indicator: FX-100, FX-Link/Act, TX-100, TX-Link/Act, FDX, PWR
  • Mountable in the converter chassis

To purchase this 60KM 10/100Base-TX/FX Bridge Single-Mode Media Converter-SC Connector please visit Fiber Savvy‘s website.

LC-LC Fiber Patch Cable Cord Duplex 10GB MM 50/125 03M Aqua

LC-LC 10GB Multimode

LC-LC, PC, Fiber Patch Cable, Duplex, Multi Mode. 50/125 Micron 10GIG Fiber OM3, 1.8mm, PVC (OFNR Rated), Aqua Jacket, 03 Meter, Specifically Designed for High Speed 10 Gigabit Ethernet Applications.

Our extensive range of fiber patch cables are terminated with state-of-the-art connectors such as ST, SC, MTRJ, and LC types to meet your standard or custom configurations. FiberSavvy.com fiber jumpers are available with PC, UPC, or APC polishing types. Our fiber optic assemblies have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.

To purchase this LC-LC Fiber Patch Cable Cord Duplex 10GB MM 50/125 03M Aqua please visit Fiber Savvy’s website.

2 Fiber Distribution Cable Corning Glass SM 9/125 Indoor/Outdoor Riser

2 Fiber Distribution Cable Corning Glass Indoor/Outdoor

FiberSavvy.com Indoor/Outdoor Cables are designed for both indoor Riser and outdoor applications. FiberSavvy.com water blocking technology is completely compatible with indoor Riser applications and offers excellent protection for outdoor applications. The specific Corning laser-optimzed optical fibers in each cable is clearly marked with jacket imprint insuring product quality and fiber compatibility for future upgrades. All cables have a durable black jacket.

Our Distribution Cable is available in 12 TIA standard colors or special order colors. UL Listed OFNR cables are available, and unlisted, unrated cables can be supplied to accommodate special needs. Standard surface print denotes construction, NEC rating, and fiber type, and includes footage markers.

Features

  • 900 um Tight Buffers
  • Water blocking aramid yarn strength members.
  • Thick, tight, OFNR Black PVC jacket.
  • Use of corning optical fibers
  • Jacket print ensures product quality and fiber compatibility.
  • Buffers strip consistently, helpful for onsite termination.
  • Durable jacket offers added protection during installation and in rugged use applications.

General Characteristics

Distribution Corning Fiber 6 Strand Single-Mode Riser

Operating Temperature -20°C to +70°C
Storage Temperature >-40°C to +70°C

 

Jacket Characteristics

Jacket Material PVC Black
Fiber Count 2
Nominal Dimension 4.4mm
Weight in lbs./km 21
Pull Load (N) Install / Operate 1998/1599
Bend Radius (cm) Install / Operate 6.6/4.4

 

Optical Characteristics

Core Size 9/125
Attenuation (MAX) 0.8 dB/km @ 1550nm
Link Lengths @ 1550nm 1 GB/s
1 GB/s = 5,000mtr 10 GB/s = 10,000mtr

To purchase this 2 Fiber Distribution Cable Corning Glass SM 9/125 Indoor/Outdoor Riser please visit Fiber Savvy’s website.

Page 9 of 19« First...7891011...15...Last »
%d bloggers like this: