Archive | Fiber Made in the USA RSS for this section

Pull Tape 1800 Pound Tensile Strength Woven Polyester, Price Per Foot

Woven Polyester Pull Tape

1800 lb Tensile Strength Pull Tape Made From Woven Polyester

This is the most competitively priced high tensile strength pull tape. This product is available with a silicone lubricant, which is compatible with the lubricant used in the manufacture of innerduct, and greatly reduces the possibility of burn-through. The tapes are also available with printed sequential footage markings for accurate measurements. Reel lengths are available up to 100,000 feet. Produced using high tensile, high tenacity, low shrink polyester fibers. The product is made in the USA.

Pull Tape Features

  • Pull and measure with one product.
  • Low coefficient of friction value minimizes burn-through of duct.
  • Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
  • Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
  • Minimizes puckering in the extrusion process – less footage required for innerduct runs.
  • Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
  • Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.

Pull Tape Specifications

Tensile Strength 1800 lb / 816 kg
Construction Woven

To purchase this Pull Tape 1800 Pound Tensile Strength Woven Polyester please visit Fiber Savvy’s website.

Pull Tape 2500 Pound Tensile Strength Woven Polyester, Price Per Foot

Woven Polyester Pull Tape

2500 lb Tensile Strength Pull Tape Made From Woven Polyester

This is the most competitively priced high tensile strength pull tape. This product is available with a silicone lubricant, which is compatible with the lubricant used in the manufacture of innerduct, and greatly reduces the possibility of burn-through. The tapes are also available with printed sequential footage markings for accurate measurements. Reel lengths are available up to 100,000 feet. Produced using high tensile, high tenacity, low shrink polyester fibers. The product is made in the USA.

Pull Tape Features

  • Pull and measure with one product.
  • Low coefficient of friction value minimizes burn-through of duct.
  • Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
  • Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
  • Minimizes puckering in the extrusion process – less footage required for innerduct runs.
  • Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
  • Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.

Pull Tape Specifications

Tensile Strength 2500 lb / 1134 kg
Construction Woven

To purchase this Pull Tape 2500 Pound Tensile Strength Woven Polyester please visit Fiber Savvy’s website.

1″ x 7″ Cinch Strap-EG 10 Pack, Reusable, Black, Made in USA

1" x 7" Cinch Strap-EG 10 Pack, Reusable, Black, Made in USA

1″ X 7″ CinchStrap-EG 10 Pack, All Purpose Strap w/ Screw Grommet, Black, Made in US

The cinch strap is a professional quality strap for taking the stress off connectors and managing cable bundles on and inside wiring racks, mobile carts, along walls, over doorways and in wiring closets. Attach to any rack or surface using any fastener up to 1/4″ diameter for mounting. Non-magnetic brass grommet spreads fastener load evenly without risk of ripping fabric and can be oriented in any direction. The quality, durability and value that this strap brings to rack management makes it a favorite of professionals. Dimensions: 1″ x 7″. Comes in a pack of 10. Black.

CinchStrap-EG Features

  • Attaches to any rack or surface. Use any fastener up to 1/4″ diameter for mounting.
  • Buckle cinch gives you more leverage.
  • Brass grommet. Non-magnetic grommet spreads fastener load evenly without risk of ripping fabric.
  • Durable hook and loop material lets you reorganize cable over and over again, up to 10,000 times.
  • Made in the USA.

CinchStrap-EG Specifications

Description 1″ x 7″ 10 Pack
Max Bundle Diameter 1.5″
Color Black, also available in Blue, Brown, Green, Grey, Orange, Red, Violet, White, Rainbow, Neon Green, Neon Orange, Neon Pink, and Neon Yellow

To purchase this 1″ X 7″ CinchStrap-EG 10 Pack, All Purpose Strap w/ Screw Grommet, Black, Made in US please visit Fiber Savvy’s website.

Dual Door Fiber Wall Mount Enclosure, 4 Splice Tray & 4 Panel Capacity, Black

Dual Door Fiber Wall Mount Enclosure, 4 Splice Tray & 4 Panel Capacity, Black

Wall Mount Enclosure, Dual Outer Doors, Holds 4 Splice Trays and 4 Adapter Panels, Black

The FiberSavvy.com FB23-3950WD4B is a compact wall mount fiber distribution unit designed to support patching and splicing in one unit. The unit has 4 adapter panel positions allowing for a wide variety of fiber termination connector types and is equipped with a double door maintaining separation and security for the Network and Distribution sides of the termination panels.

This dual door fiber wall mount enclosure is ideal for applications where space is limited. There are non-captive cable entries on the top and bottom. A grounding lug, and fiber management kit are included. This enclosure can accommodate four FB25-3995STP12 splice trays. Black, steel.

Wall Mount Cabinet Features:

  • Can be installed upside down to have jumpers exit to opposite side.
  • Compact size.
  • 4 adapter panel capacity.
  • 4 splice tray capacity.
  • Locking door for added security of your investment

Capacity

Splice Trays (4) (FB25-3995STP12) Sold Separately
Panels (4) Panels Sold Separately

Dimensions

Depth 4 IN
Height 10.8 IN
Width 12 IN
Weight 11 LBS

Physical Properties

Material 16 Gauge Steel Powder Coated Steel. Black

To purchase this Wall Mount Enclosure, Dual Outer Doors, Holds 4 Splice Trays and 4 Adapter Panels, Black please visit Fiber Savvy’s website.

Wall Mount Plastic Fiber Distribution Unit, 4 SC Connections & 4 Splices

Wall Mount Plastic Fiber Distribution Unit, 4 SC Connections & 4 Splices

Wall Mounted, Plastic Fiber Distribution Unit , Removable Cover, Swing Out Slack Tray, Holds 4 SC Connections and 4 Splices

Our 4 fiber FTTH termination box is a newly developed FTTH box for indoor applications. It is used for wall-mounted and rack-mounted applications, and mainly used in villas, commercial office buildings, Internet cafes, family and other users. It can be used to install SC adapters, the max capacity is 4 fibers.

Features

  • Compact design for FTTH solutions.
  • Accommodates up to 4 fibers.
  • Utilizes SC connections.

Capacity

Connections (4) SC Adapters Sold Separately
Splices (4) Splices

Dimensions

Depth 1.2 IN
Height 4.3 IN
Width 6 IN

Physical Properties

Material Plastic

To purchase this Wall Mount Plastic Fiber Distribution Unit, 4 SC Connections & 4 Splices please visit Fiber Savvy’s website.

Wall Mount Plastic Fiber Distribution Unit, 16 SC Connections & 24 Splices

Wall Mount Plastic Fiber Distribution Unit, 16 SC Connections & 24 Splices

Wall Mounted, Plastic Fiber Distribution Unit , Flip-Up Patch Panel, Fixed Splice Tray, Holds 16 SC Connections and 24 Splices

The FB23-4501WM24PL Splitter Terminal box is a rugged, low-cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayered design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Features

  • Indoor/Outdoor Rated
  • Available 1×4, 1×8, 1×16 splitter as well as 2×4, 2×8, 2×16 splitter
  • Suitable for wall-mounting of pole mounting applications
  • Maximum of up to 16 pieces of FTTH drop cable or pigtails
  • 2 inlet ports and 16 outlet ports

Capacity

Connections (16) SC Adapters Sold Separately
Splices (24) Splices

Dimensions

Depth 3.75 IN
Height 12 IN
Width 10.25 IN

Physical Properties

Material Plastic

To purchase this Wall Mount Plastic Fiber Distribution Unit, 16 SC Connections & 24 Splices please visit Fiber Savvy’s website.

MTP Fiber Optic Adapter Panel with 6 Multimode 10 Gig Adapters

MTP Fiber Optic Adapter Panel with 6 Multimode 10 Gig Adapters

Loaded MTP 10 Gig Multimode 6 Pack Panel

This fiber adapter panel is loaded with 6 multimode 10 gig MTP connectors. The panel snaps easily into most of our FB23 Fiber Patch Panels and Wall Mounts.

Specifications:

Connection Type MTP
Number of Connections 6
Ferrule N/A
Mode 10 Gig Multimode
Fiber Polish PC
Connection Color Aqua
Plate Color Black
Plate Code N/A
Height 1.20 in
Width 5.12 in
Weight 0.125 lb

To purchase this MTP Fiber Optic Adapter Panel with 6 Multimode 10 Gig Adapters please visit Fiber Savvy’s website.

High Density Slide-Out Patch Panel, Rack Mount 1RU, 3 Adapter Panel & 2 Splice Tray Capacity

High Density Slide-Out Patch Panel, Rack Mount 1RU, 3 Adapter Panel & 2 Splice Tray Capacity

High Density Slide-Out Removable Top Style Distribution Panel

This rack mounted fiber distribution unit provides high density fiber capacity of up to 72 fibers when utilizing three of the LC Quad adapter panels shown and two of our FB25-3401STP36 splice trays (not included). The slide out master panel tray locks into the retracted and fully extended positions. The split top design allows for easy termination access while bridge lances that run along the front of the unit provide easy tie down ability for fiber management entering or exiting the unit.

Fiber Patch Panel Features:

  • 72 Fiber capacity
  • Convenient split-top design
  • Durable powder coat finish
  • Locking master panel
  • Increased fiber management

Capacity

Splice Trays (2) (FB25-3401STP36) Sold Separately
Panels (3) LC Quad Panels Sold Separately

 

Dimensions

Depth 16″
Height 1.75″
Width 17″
Weight 18 lbs

 

Physical Properties

Color Black
Material .60″ Powder Coated Steel

To purchase this High Density Slide-Out Removable Top Style Distribution Panel, please visit Fiber Savvy’s website.

1/2″ x 600′ Wrap Strap 1 Spool, Black Hook & Loop Tie, Made in USA

1/2" x 600' Wrap Strap 1 Spool, Black Hook & Loop Tie, Made in USA

1/2″ x 600′ Wrap Strap 1 Spool, Black Hook & Loop Tie, Made in USA

Light duty strap good for ~200 re-fastenings are the professional installers choice. Wrap Strap is a single strip of double-sided hook and loop fastener that will quickly and easily wrap around almost anything. Comes as 1 spool of 600 feet. Black.

Wrap Strap Features

  • At least 200 re-fastenings.
  • 10 Colors are available.
  • WrapStrap is a single strip of double-sided hook and loop fastener that quickly and easily wraps around almost anything.
  • One of our BEST selling items.
  • You can easily cut it to length desired.
  • Made in the USA.

Wrap Strap Specifications

Description Wrap Strap
Size 1/2″ x 600′ 1 Spool
Color Black
Mfg. Warranty 30 Days

To purchase this 1/2″ x 600′ Wrap Strap 1 Spool, Black Hook & Loop Tie, Made in USA please visit Fiber Savvy’s website.

Slide-Out Patch Panel, Rack Mount 8.5RU, 12 Panels & 8 Splice Trays

Slide-Out Patch Panel, Rack Mount 8.5RU, 12 Panels & 8 Splice Trays

Fiber Patch Panel, Slide-Out Patch and Splice Combo, 8.5RU, Holds 12 Adapter Panels and 8 Splice Trays

The FiberSavvy.com FB23-3926RPS12 is an 8.5 RU combination 19” or 23” rack mounted termination and splice shelf. The unit has a 12 position termination panel in an upper slide out shelf with an 8 splice tray slide out shelf in the lower compartment. This allows for a fully front access application. The FB23-3926RPS12 is one of a family of units that support fiber termination in rack mount applications. Black, Aluminum. This product is made in the USA.

Features:

  • Can be ordered fully terminated with cabling or pigtails.
  • Front lexan door can be customized with custom logo.
  • Includes one splice tray.
  • Separate splice tray compartment for organization.
  • Supplied with mounting hardware for 19″ or 23″ mounting.

Compatibility

Splice Trays (8) FB25-3400STP24 Sold Separately
Termination Panels (12) Panels Sold Separately

 

Dimensions

Depth 14″
Height 14.88″
Width 17″
Weight 21 lbs

 

Physical Properties

Color Black or Off White (special order)
Material .060″ Powder Coated Aluminum

To purchase this Slide-Out Patch Panel, Rack Mount 8.5RU, 12 Panels & 8 Splice Trays please visit Fiber Savvy’s website.

Page 1 of 512345
%d bloggers like this: