Archive | June, 2012

Pull Tape 1800 Pound Tensile Strength Woven Polyester, Price Per Foot

Woven Polyester Pull Tape

1800 lb Tensile Strength Pull Tape Made From Woven Polyester

This is the most competitively priced high tensile strength pull tape. This product is available with a silicone lubricant, which is compatible with the lubricant used in the manufacture of innerduct, and greatly reduces the possibility of burn-through. The tapes are also available with printed sequential footage markings for accurate measurements. Reel lengths are available up to 100,000 feet. Produced using high tensile, high tenacity, low shrink polyester fibers. The product is made in the USA.

Pull Tape Features

  • Pull and measure with one product.
  • Low coefficient of friction value minimizes burn-through of duct.
  • Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
  • Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
  • Minimizes puckering in the extrusion process – less footage required for innerduct runs.
  • Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
  • Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.

Pull Tape Specifications

Tensile Strength 1800 lb / 816 kg
Construction Woven

To purchase this Pull Tape 1800 Pound Tensile Strength Woven Polyester please visit Fiber Savvy’s website.

Pull Tape 2500 Pound Tensile Strength Woven Polyester, Price Per Foot

Woven Polyester Pull Tape

2500 lb Tensile Strength Pull Tape Made From Woven Polyester

This is the most competitively priced high tensile strength pull tape. This product is available with a silicone lubricant, which is compatible with the lubricant used in the manufacture of innerduct, and greatly reduces the possibility of burn-through. The tapes are also available with printed sequential footage markings for accurate measurements. Reel lengths are available up to 100,000 feet. Produced using high tensile, high tenacity, low shrink polyester fibers. The product is made in the USA.

Pull Tape Features

  • Pull and measure with one product.
  • Low coefficient of friction value minimizes burn-through of duct.
  • Eliminates additional labor required for string, rope, winch line combination. One tape does it all.
  • Order continuous lengths from 3,000 feet to 100,000 feet to meet your requirements.
  • Minimizes puckering in the extrusion process – less footage required for innerduct runs.
  • Special silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of friction.
  • Easily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process.

Pull Tape Specifications

Tensile Strength 2500 lb / 1134 kg
Construction Woven

To purchase this Pull Tape 2500 Pound Tensile Strength Woven Polyester please visit Fiber Savvy’s website.

100Base-FX Single Mode/Multimode Media Converter, SC Connectors

100Base-FX Single Mode/Multimode Media Converter, SC Connectors

100Base-FX Media Converter, Multimode (2KM) 1310nm to Single Mode (20KM) 1310nm, SC Connectors

This MC-4465/100M/MM/SM media converter is designed to convert a 1310nm multimode fiber signal into a 1310nm single mode fiber signal and vice versa. This converter is perfect if you are looking to extend your single mode fiber run into equipment that accepts only multimode fiber. This media converter can be used in conjunction with our other single mode media converters and multimode media converters to convert your fiber into RJ45 copper media.

Features

  • Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3z standards
  • RoHS Compliant
  • Includes power adapter

Hardware Features

Standards and Protocols
IEEE 802.3
Fiber A
Multimode Fiber Port
Fiber B
Single Mode Fiber Port
Ports
SC
Transmission Fiber
Multimode: 50/125, 62.5/125
Single Mode: 8.3/125, 8.7/125, 9/125
Transmission Wavelength
1310nm
Transmission Distance
Multimode: 2km
Single Mode: 20km
Power Supply
DC 48V/2A 3A
Operating Temperature
0°C to 70°C
Operating Humidity
5% to 90% (non-condensation)

To purchase this 100Base-FX Single Mode/Multimode Media Converter, SC Connectors please visit Fiber Savvy’s website.

%d bloggers like this: