Introducing pre-polished fiber connectors

Pre-polished Fiber Connectors

FiberSavvy.com‘s Pre-Polished Fiber Connectors are the new generation in field installable fiber terminations. These connectors eliminate the need for messy epoxies and expensive tools by offering a pre-polished solution that can be installed in minutes. Pre-Polished Connectors have a pre-stubbed factory polished ferrule that joins to the fiber using a precise mechanical alignment and a special los loss index matching gel. Each Connector comes with a specially designed clip that holds the clamping devices open for the fiber to be inserted. Once the fiber is inserted, squeeze the clip to release the blades, remove clip and discard. These pre-polished connectors are sold in packs of 6 or 12 connectors and are available with LC, SC and ST connector types in 9/125 singlemode, 50/125 multimode, 62.5/125 multimode and 50/125 10GB.

Pre-Polished Fiber Connector Features

  • Available for single-mode and multimode fibers and come in SC, ST, and LC termination styles.
  • Easy to assemble.
  • No expensive tools or epoxy required.
  • No polishing required.
  • Fiber can be re-installed.
  • Meets TIA/EIA 568 performance requirements.

Singlemode Connector Specifications

Insertion Loss (Average) Standard Ceramic Ferrule: 0.2dB
Reflectance < -30 dB for PC
< -40 dB for Super PC
< -50 db for Ultra PC
< -65 dB for Angled PC
Durability ≤ 0.2 dB change. 500 Rematings, FOTP-21
Tensile Strength ≤ 0.2 dB change, 15 LB, FOTP-6
Temperature Cycling -40° to +75°, 21 cycles, <0.3 dB change
Material Ferrule: Preradiused Zirconia
Housing: Thermoplastic

 

Multimode & 10GB Connector Specifications

Insertion Loss (Average) Standard Ceramic Ferrule: 0.2dB
Reflectance -20 dB for PC
-20 dB for Super PC
-20 db for Ultra PC
-20 dB for Angled PC
Durability ≤ 0.2 dB change. 500 Rematings, FOTP-21
Tensile Strength ≤ 0.2 dB change, 15 LB, FOTP-6
Temperature Cycling -40° to +75°, 21 cycles, <0.3 dB change
Material Ferrule: Preradiused Zirconia
Housing: Thermoplastic

Tags: , , , , , ,

No comments yet.

Leave a Reply

%d bloggers like this: